How to remove verdigris from glasses

IN BRIEF

  • Identify the source of verdigris on your glasses.
  • Use a soap solution : mix a few drops of soap with lukewarm water.
  • Rub them pads with a soft brush and dishwashing liquid.
  • For metal frames, use a product stripper and rub gently.
  • Consider alternative methods such as white vinegar or the lemon for stains.

When you wear glasses, it is not uncommon to notice the appearance of these funny green spots, called verdigris, on metal frames. This pest is often the result of the oxidation of components, and it can be quite annoying to eliminate. Don’t panic! Here are some simple and effective tips for finding shiny, stain-free glasses. Get your tools ready, because it’s time to restore your glasses to their original shine!

Ah, the verdigris ! This unloved item that sometimes slips onto our precious metal glasses, leaving unsightly marks. If you have already noticed greenish spots on the pads or frames of your glasses, don’t panic! In this article, we will reveal simple and effective tips to get rid of this scourge. Get ready to make your glasses shine like the first day!

What is verdigris?

THE verdigris is a form of oxidation that forms on metal surfaces, especially those made of copper and brass. This chemical reaction results from humidity, pollution and exposure to air. On your glasses, dirt can accumulate an unsightly greenish tint which can also be caused by cosmetic products or perspiration. So, don’t worry, it’s largely unavoidable!

Tips for removing verdigris

Use white vinegar

THE white vinegar is an excellent ally for cleaning verdigris stains. Dampen a soft cloth with a little vinegar, then gently rub the affected areas. The acidity of the vinegar will act as a natural cleaner and gradually dissipate stains. Then rinse your glasses with clean water and dry them with another clean cloth.

Magic recipe: water and bicarbonate

Another equally effective remedy is to mix baking soda and water to create a paste. Apply this paste on a soft cloth and rub the affected areas. In addition to eliminating verdigris, baking soda will freshen up the frame.

The ammonia method

L’ammonia is a powerful cleaner for stubborn stains. In a container, mix one part ammonia with nine parts water. Use a soft toothbrush to apply this mixture to the plates and frames. Be sure to ventilate the room well and wear gloves to protect your hands. Once the stains are gone, rinse thoroughly with lukewarm water.

Prevention: keep your glasses in good condition

The best way to fight verdigris is to prevent its appearance. Here are some tips for keeping your glasses in perfect condition:

  • Avoid wearing your glasses in wet environments without protection.
  • Store your glasses in a case after use.
  • Clean your glasses regularly with a suitable product and a soft cloth.

When to consult a professional?

If, despite your efforts, the stains persist or if your glasses show significant signs of oxidation, do not hesitate to contact a optician professional. He will be able to advise you on the best treatment or even help you restore your glasses. Sometimes a little professional help can do wonders!

With these simple tips, you can say goodbye to verdigris and hello to glasses that sparkle. Remember, taking care of your glasses is essential to keep them in good shape for as long as possible!

discover the advantages of anti-reflective surfaces for better visual comfort. Reduce glare and enjoy an optimal visual experience with our innovative solutions.

You’ve probably noticed these little green marks appearing on your glasses, like unwanted intruders? Don’t worry, there are simple tips to eradicate them and make your lenses shine! Here are some practical tips for keeping your glasses in impeccable condition.

Prepare your cleaning solution

To start, make a cleaning solution House. All you need to do is mix a few drops of liquid soap in a small glass of lukewarm water. This mixture is effective for thoroughly cleaning glasses and removing any dirt, including traces of verdigris.

Use a soft brush

To treat the nose pads and the supports of your glasses, equip yourself with a soft brush, like an old toothbrush. With this brush, apply a mixture of Dishwashing liquid and lukewarm water. This method will help you remove residue and freshen up your frames.

Avoid abrasive products

It is crucial to remember that you should not use abrasive products or absorbent paper to wipe your glasses. These materials could scratch your lenses and cause even more damage. Always use a soft, clean fabric for drying!

The power of white vinegar

If the verdigris persists, you can try a natural cleanser: white vinegar. This product is not only effective in degreasing, but also helps eliminate certain stains. Dampen a soft cloth with a little white vinegar and gently rub the affected areas. Rinsing with clean water is recommended afterwards to avoid any lingering odor.

Revive your metal frames

For metal frames, if verdigris appears, a little tip is to use steel wool. Combine this technique with a deoxidizing product to gently scrub every nook and cranny. Be sure to rinse well and dry after cleansing for vibrant results.

For more information on restoring metal frames, see this link here.

There you have it, with these practical tips, you will be ready to keep your glasses resplendent and free of any verdigris!

Comparison of methods for removing verdigris from glasses

Methods Instructions
1. Mild soap Mix a few drops of soap in warm water, dip a soft brush and scrub gently.
2. White vinegar Soak a cloth with white vinegar and scrub the verdigris stains.
3. Ammonia Dilute ammonia with water (1:9) and apply to affected areas with a cloth.
4. Baking Soda Paste Make a paste with water and baking soda, apply to stains and rinse.
5. Steel wool Use very fine steel wool to gently scrub the metal parts.
discover anti-reflective, an innovative technology that reduces reflections on your glasses, thus improving your visual comfort and image clarity. Perfect for professionals and leisure enthusiasts, the anti-reflective offers you optimal vision in all circumstances.
  • Use a mixture of ammonia and water : Dilute one glass of ammonia in nine glasses of water to create an effective solution.
  • Apply white vinegar : A natural remedy that helps gently remove verdigris.
  • Rub with lemon juice and salt : Combine these two ingredients for an abrasive and cleaning action.
  • Use a soft brush : An old toothbrush can be great for reaching those difficult corners.
  • Clean with dishwashing liquid : It’s a simple but effective solution to preserve your glasses.
  • Scrub with steel wool : For metal frames, this helps restore the shine.
discover our innovative anti-reflective solutions which improve your visual comfort and reduce annoying reflections. enjoy a clear, glare-free viewing experience, whether for your glasses, screens or glass surfaces.

FAQ: How to remove verdigris from glasses

A: The verdigris is an oxidation of metal that often forms on eyeglass frames, giving an unsightly greenish tint.

A: An effective method is to use a mixture ofammonia and water. Mix one glass of ammonia with nine glasses of water and gently scrub the stains with a soft cloth.

A: Yes, the white vinegar is a good natural cleanser. Apply it to a cloth and gently rub the affected areas.

A: Absolutely, it is advisable to wear gloves when handling products like ammonia to avoid skin irritation.

A: Yes, one soft brush (like an old toothbrush) can be used to gently clean the pads and brackets. Be sure to use a mild soap mixed with lukewarm water.

A: If the verdigris is particularly stubborn, consider using a product stripper specific for metals, carefully following the instructions on the label.

A: Yes, to prevent the appearance of verdigris, it is recommended to put away your glasses in a case when you are not wearing them and cleaning them regularly with a suitable product.

Retour en haut